新聞中心

EEPW首頁 > 嵌入式系統 > 設計應用 > Intersil ISL62882移動CPU多相PWM穩壓方案

Intersil ISL62882移動CPU多相PWM穩壓方案

作者: 時間:2010-03-29 來源:網絡 收藏
是用于IMVP-6.5和GPU的器,具有可編程的1相或2相模式或1相GPU模式運作,精密的核電壓調整,系統對溫度的精度為0.5%,具有增強的負載線精度,7位VID輸入,1-1.500V,增量12.5mV,主要應用在筆記本電腦的處理核電壓和GPU電壓.本文介紹了的主要特性, 采用DCR和電阻檢測的GPU應用電路, 1相GPU應用參考設計電路和相應的材料清單, 2相GPU應用參考設計電路和相應的材料清單,以及EVAL2Z評估板的電路圖和材料清單.

Multiphase Regulator for IMVP-6.5 Mobile s and GPUs

The ISL62882 is a multiphase buck regulator for miroprocessor or graphics processor core power supply. The multiphase buck converter uses interleaved phases to reduce the total output voltage ripple with each phase carrying a portion of the total load current, providing better system performance, superior thermal management, lower component cost, reduced power dissipation, and smaller implementation area. The ISL62882 uses two integrated gate drivers to provide a complete solution. The PWM modulator is based on s Robust Ripple Regulator (R3) technology. Compared with traditional modulators, the R3 modulator commands variable switching frequency during load transients, achieving faster transient response. With the same modulator, the switching frequency is reduced at light load, increasing the regulator efficiency.

The ISL62882 can be configured as CPU or graphics Vcore controller and is fully compliant with IMVP-6.5 specifications. It responds to PSI# and DPRSLPVR signals by adding or dropping Phase 2, adjusting overcurrent protection threshold accordingly, and entering/exiting diode emulation mode. It reports the regulator output current through the IMON pin. It senses the current by using either discrete resistor or inductor DCR whose variation over temperature can be thermally compensated by a single NTC thermistor. It uses differential remote voltage sensing to accurately regulate the processor die voltage. The unique split LGATE function further increases light load efficiency. The adaptive body diode conduction time reduction function minimizes the body diode conduction loss in diode emulation mode. User-selectable overshoot reduction function offers an option to aggressively reduce the output capacitors as well as the option to disable it for users concerned about increased system thermal stress. The ISL62882 offers the FB2 function to optimize 1-phase performance.

The ISL62882A is the same as ISL62882 with the only exception of not having the split LGATE1 function. The ISL62882B has the same functions as the ISL62882, but comes in a different package.

ISL62882主要特性:

Programmable 1- or 2-Phase CPU Mode Operation or 1-Phase GPU Mode Operation

Precision Multiphase Core Voltage Regulation

- 0.5% System Accuracy Over-Temperature

- Enhanced Load Line Accuracy

Microprocessor Voltage Identification Input

- 7-Bit VID Input, 0V to 1.500V in 12.5mV Steps

- Supports VID Changes On-The-Fly

Supports Multiple Current Sensing Methods

- Lossless Inductor DCR Current Sensing

- Precision Resistor Current Sensing

Supports PSI# and DPRSLPVR modes

Superior Noise Immunity and Transient Response

Current Monitor and Thermal Monitor

Differential Remote Voltage Sensing

High Efficiency Across Entire Load Range

Programmable 1- or 2-Phase Operation

Two Integrated Gate Drivers

Excellent Dynamic Current Balance Between Phases

Split LGATE1 Drivers Increases Light Load Efficiency

FB2 Function Optimizes 1-Phase Mode Performance

Adaptive Body Diode Conduction Time Reduction

User-selectable Overshoot Reduction Function

Small Footprint 40 Ld 5x5 or 48 Ld 6x6 TQFN Packages

Pb-Free (RoHS Compliant)

ISL62882應用:

Notebook Core Voltage Regulator

Notebook GPU Voltage Regulator


圖1.采用DCR檢測的ISL62882 GPU應用電路

圖2.采用電阻檢測的ISL62882 GPU應用電路

圖3.1相GPU應用參考設計電路

上一頁 1 2 3 下一頁

評論


相關推薦

技術專區

關閉