新聞中心

EEPW首頁 > 電源與新能源 > 設計應用 > 采用MAX16834設計的112W升壓LED驅動器技術

采用MAX16834設計的112W升壓LED驅動器技術

作者: 時間:2012-05-31 來源:網絡 收藏



圖6.DC/DC轉換器

圖7.-降壓DC/DC轉換器

全陶瓷電容的長串參考

boost driver for long strings of s using all ceramic capacitors

This is a reference design for a 112.5W boost driver that uses the for long strings of LEDs. These long LED strings are commonly found in streetlights and parking garage lights.

Input voltage: 24VDC ±5% (at 1.49A)

VLED configuration: Two parallel strings. Each string consists of 19 WLEDs and a 5Ω resistor for current balancing. Current is 750mA per sting for a total of 1.5A into 75V.

Dimming: 50μs (min) on-pulse for up to a 200:1 dimming ratio with a 100Hz dimming frequency

圖8.升壓長串LED參考外形圖

圖9.112W升壓長串LED參考電路圖

112W升壓長串LED驅動器參考設計材料清單(BOM):

本文引用地址:http://butianyuan.cn/article/177085.htm
上一頁 1 2 下一頁

評論


相關推薦

技術專區

關閉