Renesas V850ES-Jx3 移動心電圖(ECG)解決方案

Renesas 公司的V850ES-Jx3 系列32位MCU包括V850ES/JC3-L系列和V850ES/JE3-L系列,集成了V850ES CPU內核和外設功能如ROM/RAM,定時器/計數器,串行接口,ADC,DAC,主要用在數碼相機,電表,移動終端,數字家用電器和其它消費類電子.本文介紹了V850ES-Jx3 系列主要特性,方框圖,以及移動心電圖(ECG)系統框圖和移動心電圖(ECG)推薦的元件.

The V850ES/Jx3 microcontrollers are equipped with a high-capacity memory of 1 MB. Naturally furnished with functional interchangeability and pin interchangeability with the V850ES/Jx2 microcontrollers and capable of appropriating their development environment as well, the V850ES/Jx3 devices are capable of realizing system acceleration with ease.

The newest arrival to the lineup is the V850ES/Jx3-L microcontroller, an ultra-low power-consuming version of the V850ES/JG2 microcontroller, with less than half of its power comsumption current. The V850ES/Jx3-L lineup has achieved an industry-leading nominal power/performance ratio (0.9 mW/MIPS, which comes in under the 1 mW marker according to the Dhrystone evaluation) and actual operating current of 13 mA typ. (at 20 MHz) .Moreover, microcontrollers built in USB (peripheral) function are added in this low power V850ES/Jx3-L product lineup.

The V850ES/JC3-L and V850ES/JE3-L are 32-bit single-chip microcontrollers that include the V850ES CPU core and peripheral functions such as ROM/RAM, timer/counters, serial interfaces, an A/D converter, a D/A converter.

In addition to high real-time response characteristics and 1-clock-pitch basic instructions, the V850ES/JC3-L and V850ES/JE3-L feature multiply instructions, saturated operation instructions, bit manipulation instructions, etc., realized by a hardware multiplier, as optimum instructions for digital servo control applications. Moreover, as a real-time control system, the V850ES/JC3-L and V850ES/JE3-L enable an extremely high cost-performance for applications that require super low power consumption, such as PC peripheral device, ECR peripheral device, and industrial instrument.

V850ES-Jx3 系列主要特性:

Minimum instruction execution time: 50 ns (operating on main clock (fXX) of 20 MHz: VDD = 2.7 to 3.6 V)

200 ns (operating on main clock (fXX) of 5 MHz: VDD = 2.2 to 3.6 V)

30.5 s (operating on subclock (fXT) of 32.768 kHz)

General-purpose registers: 32 bits 32 registers

CPU features: Signed multiplication (16 16 →32): 1 to 2 clocks

Signed multiplication (32 32 →64): 1 to 5 clocks

Saturated operations (overflow and underflow detection functions included)

Most instructions can be executed in 1 clock cycle by using 32-bit RISC-based 5-stage pipeline architecture

Instruction fetching from internal ROM and accessing internal RAM for data can be

executed separately, by using Harvard architecture

High code efficiency achieved by using variable length instructions

32-bit shift instruction: 1 clock cycle

Bit manipulation instructions

Load/store instructions with long/short format

Memory space: 64 MB of linear address space (for programs and data)

Internal memory: RAM: 8/16 KB

Flash memory: 16/32/64/128/256 KB

Interrupts and exceptions:

Ports: I/O ports: 27/34/50

Timer function: 16-bit interval timer M (TMM): 1 channel

16-bit timer/event counter P (TMP): 6 channels

16-bit timer/event counter Q (TMQ): 1 channel

Watch timer: 1 channel

Watchdog timer: 1 channel

Real-time counter: 1 channel

Real-time output port: 6 bits 1 channel

Serial interface: For details about the number of incorporated channels, Asynchronous serial interface A (UARTA)

Clocked serial interface B (CSIB)

I2C bus interface (I2C)