基于51單片機的智能小車（遙控模塊尋跡避障）

#includesbit P1_0 = P1^0;sbit P1_1 = P1^1;sbit P1_2 = P1^2;sbit P1_3 = P1^3;sbit P1_4 = P1^4;sbit P1_5 = P1^5;sbit P1_6 = P1^6;sbit P1_7 = P1^7;sbit P2_0 = P2^0;sbit P2_1 = P2^1;sbit P2_2 = P2^2;sbit P2_3 = P2^3;sbit P2_4 = P2^4;sbit P2_5 = P2^5;sbit P2_6 = P2^6;sbit P2_7 = P2^7;sbit P3_2 = P3^2;sbit P3_3 = P3^3;sbit P3_4 = P3^4;sbit P3_5 = P3^5;sbit P3_6 = P3^6;sbit P3_7 = P3^7;#define uchar unsigned char#define uint unsigned int#define Left_1_led        P3_2  //P3_2接四路尋跡模塊接口第一路輸出信號即中控板上面標記為OUT1#define Right_1_led       P3_3  //P3_3接四路尋跡模塊接口第二路輸出信號即中控板上面標記為OUT2 #define Left_2_led        P3_4  //P3_4接四路尋跡模塊接口第三路輸出信號即中控板上面標記為OUT3#define Right_2_led       P3_5  //P3_5接四路尋跡模塊接口第四路輸出信號即中控板上面標記為OUT4#define Left_moto_go      {P1_0=1,P1_1=0,P1_2=1,P1_3=0;}  //左邊兩個電機向后轉#define Left_moto_back    {P1_0=0,P1_1=1,P1_2=0,P1_3=1;}    //左邊兩個電機向前走#define Left_moto_Stop    {P1_0=0,P1_1=0,P1_2=0,P1_3=0;}    //左邊兩個電機停轉                    #define Right_moto_go     {P1_4=1,P1_5=0,P1_6=1,P1_7=0;} //右邊兩個電機向前走#define Right_moto_back   {P1_4=0,P1_5=1,P1_6=0,P1_7=1;} //右邊兩個電機向前走#define Right_moto_Stop   {P1_4=0,P1_5=0,P1_6=0,P1_7=0;} //右邊兩個電機停轉  /*********************************延時函數 ***************************************/ void delay(uint k){   uint x,y;for(x=0;x
				
            

				
					
					
				
			
                
			
							

                
			            

                            	              		              		上一頁
              		1
              		              			              		              	              				              				2
              					              						              						              				下一頁