新聞中心

S3C2440-LCD字符顯示

作者： 時間：2016-12-02 來源：網絡 收藏
LCD字符顯示有兩種方式，一個是通過字模提取軟件，將字符轉化成一個字節型的數組，另一個是使用字庫。如果字符較多的時候，直接使用字庫比較方便?，F(xiàn)在說一下中英文字符的存儲結構和編碼方式。中英文的字符點陣結構有4*8，8*16，16*16，24*24，32*32，48*48等結構形勢，不同點陣漢字的字體又有宋體，仿宋體，黑體，楷體等之分。在計算機中，相同點陣結構和相同字體的字符存放在同一字庫中。本文使用的是16*16的宋體。16*16的點陣字庫中，字符的信息結構采用以行排列的形式，共有16行，每行有16個點，分別存放在兩個字節內。因此每個字符共占用16*16/2=32個字節。字節的存放順序?yàn)閺淖蟮接?，從上到下。將漢字變成字符模式，使用16*16個像素表示一個漢字。在字模提取的過程中，還要注意取模的順序，順序不同，得到的數組就不同，一般式從左向右，從上到下。取模方式，逐行式。ASCII型字符的寬度是漢字的一半，即8。
#define rGPCCON (*(volatile unsigned *)0x56000020)
#define rGPCUP (*(volatile unsigned *)0x56000028)
#define rGPDCON (*(volatile unsigned *)0x56000030)
#define rGPDUP (*(volatile unsigned *)0x56000038)
#define rLCDCON1 (*(volatile unsigned *)0x4d000000)
#define rLCDCON2 (*(volatile unsigned *)0x4d000004)
#define rLCDCON3 (*(volatile unsigned *)0x4d000008)
#define rLCDCON4 (*(volatile unsigned *)0x4d00000c)
#define rLCDCON5 (*(volatile unsigned *)0x4d000010)
#define rLCDSADDR1 (*(volatile unsigned *)0x4d000014)
#define rLCDSADDR2 (*(volatile unsigned *)0x4d000018)
#define rLCDSADDR3 (*(volatile unsigned *)0x4d00001c)
#define rLCDINTMSK (*(volatile unsigned *)0x4d00005c)
#define rTPAL (*(volatile unsigned *)0x4d000050)
#define rGPGCON (*(volatile unsigned *)0x56000060) //Port G control
#define rGPGDAT (*(volatile unsigned *)0x56000064) //Port G data
#define rGPGUP (*(volatile unsigned *)0x56000068) //Pull-up control G
#define rLCDINTMSK (*(volatile unsigned *)0x4d00005c)
#define rTCONSEL (*(volatile unsigned *)0x4d000060) //LPC3600 Control --- edited by junon
//垂直同步信號的脈寬、后肩和前肩
#define VSPW 15
#define VBPD 3
#define VFPD 5
//水平同步信號的脈寬、后肩和前肩
#define HSPW 8
#define HBPD 58
#define HFPD 15
#define CLKVAL 10
#define HOZVAL 319
#define LINEVAL 239
#define PWREN 1
#define MMODE 0
#define PNRMODE 3
#define BPPMODE 13
#define INVVCLK 0
#define INVVD 0
#define INVVDEN 0
#define U32 unsigned int
#define M5D(n) ((n) & 0x1fffff)
#define PAGEWIDTH 320
#define OFFSIZE 0
#define LCD_XSIZE 320
#define LCD_YSIZE 240
#define SCR_XSIZE 320
#define SCR_YSIZE 240
#define INVVLINE 1
#define INVVFRAME 1
#define BPP24BL 0
#define BSWP 0
#define HWSWP 0
volatile U32 LCD_BUFFER[240][320];
unsigned char li[]={
0x01,0x00,0x01,0x00,0x7F,0xFC,0x03,0x80,0x05,0x40,0x09,0x30,0x31,0x0E,0xDF,0xE4,
0x00,0x80,0x01,0x00,0x7F,0xFE,0x01,0x00,0x01,0x00,0x01,0x00,0x05,0x00,0x02,0x00}; //"李",0
unsigned char wan[]={
0x00,0x00,0x7F,0xFE,0x02,0x00,0x02,0x00,0x02,0x10,0x03,0xF8,0x02,0x10,0x04,0x10,
0x04,0x10,0x04,0x10,0x08,0x10,0x08,0x10,0x10,0x10,0x20,0xE0,0x40,0x40,0x00,0x00}; //"萬",1
unsigned char peng[]={
0x00,0x10,0x77,0x20,0x55,0x7C,0x55,0x64,0x77,0x54,0x55,0x54,0x55,0x4C,0x55,0x40,
0x77,0x7E,0x55,0x02,0x55,0x02,0x55,0xFA,0x55,0x02,0xB9,0x14,0x13,0x08,0x00,0x00}; //"鵬",2
unsigned char L[]={0X00,0X00,0X00,0XE0,0X40,0X40,0X40,0X40,0X40,0X40,0X40,0X40,0X42,0XFE,0X00,0X00}; //L
unsigned char I[]={0X00,0X00,0X00,0X7C,0X10,0X10,0X10,0X10,0X10,0X10,0X10,0X10,0X10,0X7C,0X00,0X00}; //I
unsigned char N[]={0X00,0X00,0X00,0XC7,0X62,0X62,0X52,0X52,0X4A,0X4A,0X4A,0X46,0X46,0XE2,0X00,0X00}; //N
unsigned char U[]={0X00,0X00,0X00,0XE7,0X42,0X42,0X42,0X42,0X42,0X42,0X42,0X42,0X42,0X3C,0X00,0X00}; //U
unsigned char X[]={0X00,0X00,0X00,0XE7,0X42,0X24,0X24,0X18,0X18,0X18,0X24,0X24,0X42,0XE7,0X00,0X00}; //X
unsigned char AND[]={0X00,0X00,0X00,0X30,0X48,0X48,0X48,0X50,0X6E,0XA4,0X94,0X88,0X89,0X76,0X00,0X00}; //&
unsigned char A[]={0X00,0X00,0X00,0X10,0X10,0X18,0X28,0X28,0X24,0X3C,0X44,0X42,0X42,0XE7,0X00,0X00}; //A
unsigned char R[]={0X00,0X00,0X00,0XFC,0X42,0X42,0X42,0X7C,0X48,0X48,0X44,0X44,0X42,0XE3,0X00,0X00}; //R
unsigned char M[]={0X00,0X00,0X00,0XEE,0X6C,0X6C,0X6C,0X6C,0X54,0X54,0X54,0X54,0X54,0XD6,0X00,0X00}; //M
void Init_LCD(){
rLCDCON1=(CLKVAL＜＜8)|(MMODE＜＜7)|(PNRMODE＜＜5)|(BPPMODE＜＜1)|0; //設置CLKVAL，VCLK=HCLK/[(CLKVAL+1)*2],決定VM的觸發方式，選擇顯示模式和BPP模式，暫時不要開啟LCD，因?yàn)檫€沒有設置好
rLCDCON2=(VBPD＜＜24)|(LINEVAL＜＜14)|(VFPD＜＜6)|(VSPW); //rLCDCON2，rLCDCON3和rLCDCON4主要設置時序
rLCDCON3=(HBPD＜＜19)|(HOZVAL＜＜8)|(HFPD);
rLCDCON4=(HSPW);
rLCDCON5 = (BPP24BL＜＜12) | (INVVCLK＜＜10) | (INVVLINE＜＜9) | (INVVFRAME＜＜8) | (0＜＜7) | (INVVDEN＜＜6) | (PWREN＜＜3) |(BSWP＜＜1) | (HWSWP); //INVVLINE和INVVFRAME需要進行翻轉，因?yàn)镃PU發出的是正脈沖，LCD使用的是負脈沖，所以要改變極性，PWREN使能電源信號
rLCDSADDR1=(((U32)LCD_BUFFER＞＞22)＜＜21)|M5D((U32)LCD_BUFFER＞＞1);
rLCDSADDR2=M5D(((U32)LCD_BUFFER+(SCR_XSIZE*SCR_YSIZE*4))＞＞1 );
rLCDSADDR3=PAGEWIDTH*32/16;
rLCDINTMSK|=(3);
rTCONSEL = 0;
rGPCUP = 0x0;
rGPDCON = 0xaaaaaaaa;
rGPCCON = 0xaaaa02a9;
rGPDUP = 0x0;
rGPGUP=rGPGUP&("(1＜＜4))|(1＜＜4);
rGPGCON=rGPGCON&("(3＜＜8))|(3＜＜8);
rLCDCON1 |= 1; //使能數據輸出和LCD控制信號
}

上一頁 1 2 3 下一頁

關鍵詞： S3C2440LCD字符顯

評論


技術專區

關閉