OnSemiNCP107515W低功耗離線開關電源解決方案
The NCP1072/NCP1075 products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a PDIP?7 or SOT?223 package, the NCP1072/5 offer a high level of integration, including soft?start, frequency?jittering, short?circuit protection, skip?cycle, a maximum peak current set point, ramp compensation, and a Dynamic Self?Supply (eliminating the need for an auxiliary winding).
Unlike other monolithic solutions, the NCP1072/5 is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65, 100 or 130 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to reduce the standby consumption down to a no load condition.
Protection features include: a timer to detect an overload or a short?circuit event, Overvoltage Protection with auto?recovery and AC input line voltage detection. For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
NCP1072/NCP1075主要特性:
? Built?in 700 V MOSFET with RDS(on) of 11
? Large Creepage Distance Between High?voltage Pins
? Current?Mode Fixed Frequency Operation – 65 / 100 /130 kHz (130 kHz on demand only)
? Peak Current: NCP1072 with 250 mA and NCP1075 with 450 mA
? Fixed Ramp Compensation
? Skip?Cycle Operation at Low Peak Currents Only: No Acoustic Noise!
? Dynamic Self?Supply: No Need for an Auxiliary Winding
? Internal 1 ms Soft?Start
? Auto?Recovery Output Short Circuit Protection with Timer?Based Detection
? Auto?Recovery Overvoltage Protection with Auxiliary Winding Operation
? Frequency Jittering for Better EMI Signature, Including Frequency Foldback Mode
? No Load Input Consumption 50 mW
? Frequency Foldback to Improve Efficiency at Light Load
? Internal Temperature Shutdown
? These are Pb?Free Devices
NCP1072/NCP1075典型應用:
? Auxiliary / Standby Isolated Power Supplies White Goods / Smart Meter / E?Meter
圖1.NCP1072/NCP1075方框圖
圖2.NCP1075 12V/0.85A通用輸入電源電路圖
15W開關電源評估板NCP1075SOTGEVB
圖3.15W開關電源評估板NCP1075SOTGEVB外形圖
圖4.15W開關電源評估板NCP1075SOTGEVB電路圖
15W開關電源評估板NCP1075SOTGEVB材料清單(BOM):
詳情請見:
http://www.onsemi.cn/pub_link/Collateral/NCP1072-D.PDF
評論