Linux下新手裝網卡指南

3Com PCI Etherlink PCI and EISA cards

Intel EtherExpress Pro100B, Pro100+ and Pro10+ PCI

3c515 ISA Fast Etherlink card

SMC EtherPower II (EPIC/100 83c170 chip) driver.

RealTek RTL8129/8139 driver.

Lite-On lc82c168 PNIC driver (now merged with the Tulip driver).

Macronix MX98713 and ASIX experimental drivers are now merged with the Tulip driver).

VIA Rhine (VT86C100A and 3043) driver (now released).

Winbond w89c840 driver (beta test). Note: this driver was written without official documentation.

TI ThunderLAN driver (external link -- Caldera/James Banks).

Hewlett Packard 100VG driver updates (external link -- Yaroslav).

Intel EtherExpress Pro/10 PCI driver (remote link).

3c509/3c529/3c579 ISA/MCA/EISA EtherLink III driver update. The driver now detects multiple cards when loaded as a module.

AMD LANCE/PCnet driver update. The driver is now usable as a loadable module.

Cirrus/Crystal/IBM CS8900 series driver (remote link).

PCI NE2000 driver (local page)

PCI NE2000 updates (remote link)

Intel Etherexpress Pro 100,

DEC 21X4* based board,

3Com EtherLink III PCI/EISA (3c590 3c592,3c595,3c597,3c900 3c905)

Intel EtherExpress Pro/10 PCI9 With i82596 Chip)

TI ThunderLan

PCI NE2000

Packet Engines Yellowfin G-NIC

SMC EtherPower II (EPIC/100 83c170 chip)

RealTek RTL8129/8139

同時還有一個Ecom EtherLink III family 的setup程序，沒有用過，也許不錯。

如果這里你還是沒有找到相應的網卡驅動，那么就去search了。我推薦的方法是上Internet Newsgroup查。因為你絕對不是第一個在Linux下用這個網卡的人，你的問題絕對有人在網絡上問過。而且有人回答過。那么問題就是如何找到他。最簡單的方法是打開netscape 到www.dejanews.com去。這里的關鍵是關鍵字的選則，比如我有個卡的芯片是DEC的21140，那么我考慮到21140已經是個長數字，于是輸入21140 linux來搜索，這里L(fēng)inux是必須的，否則看到上千篇關于21140 win95的驅動問題，是不是很煩?結果21140 linux很快就找到了有關文章。

如果這樣也找不到驅動程序，或者有了驅動程序不知道怎么用，用了出問題，再來版上問。記得把具體的網卡型號，芯片型號，你作過什么努力，什么問題等都寫清楚，以便于他人幫助。