基于GSM模塊的大棚環境參數傳輸與控制

設計者：胥學辰時間：2011-11-1——2011-11-6功能：18B20采集溫度，dht11采集濕度，光敏電阻采集光照等，通過GSM接受指令傳輸參數，控制外部器件改變環境參數。完整代碼下載:http://www.51hei.com/f/gpsdd.rar***********************************************/#include#include#include#include#define uchar unsigned char#define uint unsigned intsbit DQ_wen=P2^0;sbit DQ_shi=P2^1;uchar i=0,j=0,flag,tm,temp,wet,dat;char num[]="15282983798";                     //定義要撥打的電話號碼char code Huifu_S[]="Fa Song Success!";       //定義成功發送要回復的內容char code Huifu_F[]="Fa Song Failure!";       //定義失敗發送要回復的內容char Huifu_wsg[]="temp:00.00C wet:23%R";               //定義參數回復數組char xdata Huancun[200];          //定義返回值存儲數組char code Ok[]="OK";           //返回OK值標志char code CMTI[]="+CMTI";          //接收短信標志char code open_1[]="open1";             //短信控制1標志char code open_2[]="open2";             //短信控制2標志char code open_3[]="open3";             //短信控制3標志char code open_4[]="open4";             //短信控制4標志void delay_key(uchar z);                      //按鍵延時函數void delay_GSM(uint y);                       //GSM模塊延時函數void delay_18b20(uchar i);       //18b20延時函數void delay_dht11_C(uint j);       //dht11長延時函數void delay_dht11_D(uchar i);      //dht11短延時函數void chuankou_init();                         //串口初始化函數void clear_huancun();                         //清除緩存函數void send_ASCII(uchar *b);                    //發送ASCII代碼函數void send_16_Hex(uchar c);                    //發送16進制代碼函數bit panduan(uchar *a,uchar *b);               //判斷是否返回OK與短信成功代碼void GSM_Text_Message(uchar*num,uchar*Huifu); //Text模式短信發送函數void GSM_Call(uchar *num);                    //撥打電話函數void Tiqu_num();         //提取來電號碼函數void init_18b20();         //18b20初始復位函數void write_18b20_dat(uchar dat);     //18b20寫入字節函數uchar read_18b20_dat();        //18b20讀出字節函數uchar read_18b20_temp_zs();       //18b20讀取溫度整數函數uchar read_18b20_temp_xs();       //18b20讀取溫度小數函數void dht11_init(void);        //dht11初始化函數uchar read_dht11(void);        //dht11讀取濕度函數void chuli_wen_wet_light();       //18b20_dht11_light處理函數void main()           //主函數{chuankou_init();            //串口初始化clear_huancun();            //清除緩存delay_GSM(1000);            //延時while(!panduan(Huancun,Ok))         //判斷返回值{send_ASCII("AT");          //發送聯機命令send_16_Hex(0x0d);                     //發送回車符    send_16_Hex(0x0a);                   //發送換行符P0=0x01;                      //步驟指示燈1delay_GSM(600);          //延時}          clear_huancun();        //清除緩存P0=0x02;          //步驟指示燈2delay_GSM(600);            //延時send_ASCII("AT+CNMI=2,1");                //設置當有新短信到來時提示 send_16_Hex(0x0d);                        //發送回車符send_16_Hex(0x0a);                        //發送換行符delay_GSM(600);                           //延時while(!panduan(Huancun,Ok));              //等待設置成功clear_huancun();                          //清除緩存內容P0=0x03;                                  //步驟指示燈3delay_GSM(600);                           //延時  send_ASCII("AT+CMGF=1");                  //文本(TEXT)模式 send_16_Hex(0x0d);                        //發送回車符send_16_Hex(0x0a);                        //發送換行符delay_GSM(600);                           //延時while(!panduan(Huancun,Ok));           //等待設置成功clear_huancun();                          //清除緩存內容P0=0x04;                                  //步驟指示燈4delay_GSM(600);                           //延時send_ASCII("AT+CMGD=1");                  //刪除第一條信息send_16_Hex(0x0d);                        //發送回車符send_16_Hex(0x0a);                        //發送換行符delay_GSM(600);                           //延時while(!panduan(Huancun,Ok));           //等待設置成功clear_huancun();                          //清除緩存內容while(1)          //與GSM模塊聯機成功后的大循環{ P0=0x05;             //步驟指示燈5chuli_wen_wet_light();       //實時采集處理溫度if(panduan(Huancun,CMTI))                //若緩存字符串中含有"+CMTI"就表示有新的短信{P0=0x06;         //步驟指示燈6clear_huancun();                      //清除緩存內容delay_GSM(600);                       //延時send_ASCII("AT+CMGR=1");              //發送讀取信息指令send_16_Hex(0x0d);                    //發送回車符send_16_Hex(0x0a);                    //發送換行符delay_GSM(600);                       //延時Tiqu_num();         //提取來電號碼if(panduan(Huancun,open_1))           //如果信息內容是"open1"{ P0=0x10;         //指示燈GSM_Text_Message(num,Huifu_wsg);   //發送環境參數信息GSM_Text_Message(num,Huifu_S);   //發送成功短信回復}else if(panduan(Huancun,open_2))      //如果信息內容是"open2"{P0=0x20;                           //指示燈GSM_Text_Message(num,Huifu_S);   //發送成功短信回復}else if(panduan(Huancun,open_3))      //如果信息內容是"open3"{ P0=0x40;                            //指示燈GSM_Text_Message(num,Huifu_S);   //發送成功短信回復}else if(panduan(Huancun,open_4))      //如果信息內容是"open4"{ P0=0x80;                           //指示燈GSM_Text_Message(num,Huifu_S);   //發送成功短信回復}elseGSM_Text_Message(num,Huifu_F);   //發送失敗短信回復clear_huancun();                      //清除緩存內容delay_GSM(600);                       //延時send_ASCII("AT+CMGD=1");              //刪除讀取后的信息send_16_Hex(0x0d);                    //發送回車符send_16_Hex(0x0a);                    //發送換行符delay_GSM(600);                       //延時while(!panduan(Huancun,Ok));       //等待設置成功clear_huancun();                      //清除緩存內容}} }/****************************各環節延時函數*****************************/void delay_key(uchar x)        //按鍵控制延時函數{uchar y;for(;x>0;x--)for(y=110;y>0;y--);}void delay_GSM(uint y)        //GSM模塊延時函數{uint x;for(;y>0;y--){x=1500;while(x--);}}void delay_18b20(uchar i)       //18b20延時函數{while(i--);}void delay_dht11_C(uint j)       //dht11長延時函數{      uchar i;for(;j>0;j--) for(i=0;i<27;i++);}void delay_dht11_D(uchar i)       //dht11短延時函數{for(;i>0;i--)_nop_();}void chuankou_init()      //串口初始化函數{SCON=0x50;                      //串口:方式1,允許發送和接收TMOD=0x20;                      //定時器1:模式2,8位自動重裝模式,用于產生波特率    TH1=0xFD;                       //11.0592MHZ晶振，波特率為9600TL1=0xFD;   TR1=1;                          //開啟定時器1   ES=1;                           //開啟串口中斷EA=1;                           //開啟全局中斷}/****************************GSM部分函數*****************************/void clear_huancun()      //清除緩存內容函數{uchar k;for(k=0;k<200;k++)              {Huancun[k]=0;       //將緩存內容清零}i=0;                            //接收字符串的起始存儲位置}void send_ASCII(uchar *b)          //發送字符串函數{ES=0;                           //關串口中斷for(b;*b!=