玩轉單片機之四-點亮4個數碼管

#define uchar unsigned char //byte
#define uint unsigned int //word

sbit led1=P0^0;
sbit led2=P0^1;
sbit fir=P2^4; //fir=0;工作
sbit sec=P2^5; //sec=0;工作
sbit thi=P2^6; //thi=0;工作
sbit fot=P2^7; //fot=0;工作

uchar table[]={0x28,0xeb,0x32,0xa2,0xe1,0xa4,0x24,0xea,0x20,0xa0};
//P1=table[i]; 0 1 2 3 4 5 6 7 8 9

/**************************************************/
/* 延時模塊 聲明：void delay(int); */
/**************************************************/
void delay(int x) //如 delay(1000),延時1s
{
int i,j;
for(i=0;ifor(j=1;j<=125;j++); //延時約1ms
}
void main(void)
{/*初始化數據*/
uchar a;
a=0x08;
/*串口初始化，波特率為9600*/
TMOD=0x20;
PCON=0x00;
SCON=0x50;
TL1=0xfd;
TH1=0xfd;
TR1=1;

while(1)
{/*點亮4個數碼管，P2為選擇數碼管編號，P1為選擇數字，同時點亮led燈*/
delay(800);P2=0x0F;P1=table[0];led1=0; led2=1;
delay(800);P2=0x0F;P1=table[1];led1=1; led2=0;
delay(800);P2=0x0F;P1=table[2];led1=0; led2=1;
delay(800);P2=0x0F;P1=table[3];led1=1; led2=0;
delay(800);P2=0x0F;P1=table[4];led1=0; led2=1;
delay(800);P2=0x0F;P1=table[5];led1=1; led2=0;
delay(800);P2=0x0F;P1=table[6];led1=0; led2=1;
delay(800);P2=0x0F;P1=table[7];led1=1; led2=0;
delay(800);P2=0x0F;P1=table[8];led1=0; led2=1;
delay(800);P2=0x0F;P1=table[9];led1=1; led2=0;

/*發送字節數據*/
SBUF=a;
while(TI==0) ;
TI=0;
}
}