51單片機C編程（四、定時器秒表數碼管顯示）

#include
#define uchar unsigned char
#define uint unsingned int
#define LED P0

uchar tab[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};//共陽數碼管數字碼
uchar num,t,shi,ge;

//----------------子函數初始化--------------------
void init();
void timer0();
void display();
void delay(uchar);
//-----------------主函數-------------------
void main()
{
init();
while(1)
{
timer0();
display();

}
}
//-----------------定時器0初始化-------------------
void init()
{
num=t=0;
TMOD=0x01;
TH0=(65536-15536)/256;
TL0=(65536-15536)%256;
EA=1;
ET0=1;
}
//-----------------計時函數-------------------
void timer0()
{
TR0=1;//啟動定時器0
if(TF0==1)//查詢定時器0的中斷標志位TF0
{
TF0=0;
t++;
if(t==10)
{
t=0;
num++;
}
}
}
//-----------------顯示函數-------------------
void display()
{
shi=num/10;//計算時間的十位數與個位數
ge=num%10;

P2=0x01;//選中個位并顯示
LED=tab[ge];
delay(5);

P2=0x02;//選中十位并顯示
LED=tab[shi];
delay(5);
}
//-----------------延時函數-------------------
void delay(uchar x)
{
int i,j;
for(i=x;i>0l;i--)
for(j=255;j>0;j--);
}