怎樣讓Keil軟件同時兼容51單片機和ARM單片機的問題

這幾天因?yàn)楣镜钠齐娔X只有 10G的C盤空間被我裝軟件以及桌面上放的各種文件給填滿了，所以打算把一些軟件移到其它盤，刪除了KEIL軟件以后，發現之前可以同時編譯51和ARM 的keil夭折了，所以自己研究了一下，把它的過程記錄下來留著以后可作參考。具體方法如下:
第一步到http://www.51hei.com/下載并安裝Keil C：
直接找開Keil C一直下一步，中間填下SN碼，這個在破解的KEIL C軟件里面都會有的。安裝完成后的環境如下：


第二步把上圖Tools文件用文本的方式打開并復制里面的內容保存起來，內容如下:

[C51]
BOOK0=HLPRELEASE_NOTES.HTM("Release Notes")
BOOK1=HLPGS51.PDF("uVision2 Getting Started")
BOOK2=HLPC51.PDF("C51 Users Guide")
BOOK3=HLPC51LIB.CHM("C51 Library Functions",C)
BOOK4=HLPA51.PDF("Assembler/Utilities")
BOOK5=HLPTR51.CHM("RTX51 Tiny Users Guide")
BOOK6=HLPDBG51.CHM("uVision2 Debug Commands")
BOOK7=ISD51ISD51.HTM("ISD51 In System Debugger")
BOOK8=HLPFlashMon.CHM("Flash Monitor")
BOOK9=MON390MON390.HTM("MON390: Dallas Contiguous Mode Monitor")
TDRV0=BINMON51.DLL ("Keil Monitor-51 Driver")
TDRV1=BINISD51.DLL ("Keil ISD51 In-System Debugger")
TDRV2=BINMON390.DLL ("MON390: Dallas Contiguous Mode")
TDRV3=BINLPC2EMP.DLL ("LPC900 EPM Emulator/Programmer")
RTOS1=RTXTINY.DLL ("RTX-51 Tiny")
RTOS2=RTX51.DLL ("RTX-51 Full")
Version=V7.0
PATH="D:KeilC51"
SN=K1DZP-5IUSH-A01UE

我用的軟件兼容性還是蠻好的，里面有C251,,,C51的聲明段，因?yàn)槲抑灰玫?1和ARM兼容，所以我只把C51的代碼復制下來就行了。
第三步安裝ADK，這里要注意ADK的版本要比KEIL C的版本高一個等級，只有這樣才能兼容，如果不這樣的話，可能調試功能部分會有問題。比如KEIL與proteus進行調試時會出現調試不了的問題。
安裝ADK同上，直接下一步，有提示要SN號的時候在軟件里面找了復制，粘貼就行了。安裝路徑跟KEIL C的路徑一樣就行了，我在網上看有人說不能同一個路徑，其實同個路徑好點，省了過會要復制兩次代碼，而且還不用搞兩個電路在電腦，又麻煩又不方便。安裝后的效果如下：

接著打開TOOLS文件，把上面的代碼復制，粘貼上去。
[UV2]
BOOK0=UV3RELEASE_NOTES.HTM("uVision Release Notes")
BOOK1=
ARMUSE=0
rem ARMUSE= 0:=Cygnus/GNU, 1:=ARM-ADS, 2:=Keil (future)
Version=V2.2
ORGANIZATION="LN"
NAME="admin Michael", "DSD"
EMAIL="LUSSBY"
ARMSEL=1

[C166]
BOOK0=HLPRELEASE_NOTES.HTM("Release Notes")
BOOK1=HLPGS166.PDF("uVision2 Getting Started")
BOOK2=HLPC166.PDF("C166 Users Guide")
BOOK3=HLPC166LIB.CHM("C166 Library Functions",C)
BOOK4=HLPEC166.CHM("EC166 Embedded C++")
BOOK5=HLPA166.PDF("A166 & Utilities Users Guide")
BOOK6=HLPDBG166.CHM("uVision2 Debug Commands")
BOOK7=HLPOCDS.CHM("OCDS Debugging")
TDRV0=MONITORMON166.DLL ("Keil Monitor-166 Driver")
TDRV1=OCDSCBC166.DLL ("OCDS Driver for C16xU/H/UTAH")
TDRV2=OCDSOCDSXC.DLL ("OCDS Driver for XC16x")
RTOS1=RTXTINY.DLL ("RTX-166 Tiny")
RTOS2=RTXFULL.DLL ("RTX-166 Full")
Version=V4.2

[C51]
BOOK0=HLPRELEASE_NOTES.HTM("Release Notes")
BOOK1=HLPGS51.PDF("uVision2 Getting Started")
BOOK2=HLPC51.PDF("C51 Users Guide")
BOOK3=HLPC51LIB.CHM("C51 Library Functions",C)
BOOK4=HLPA51.PDF("Assembler/Utilities")
BOOK5=HLPTR51.CHM("RTX51 Tiny Users Guide")
BOOK6=HLPDBG51.CHM("uVision2 Debug Commands")
BOOK7=ISD51ISD51.HTM("ISD51 In System Debugger")
BOOK8=HLPFlashMon.CHM("Flash Monitor")
BOOK9=MON390MON390.HTM("MON390: Dallas Contiguous Mode Monitor")
TDRV0=BINMON51.DLL ("Keil Monitor-51 Driver")
TDRV1=BINISD51.DLL ("Keil ISD51 In-System Debugger")
TDRV2=BINMON390.DLL ("MON390: Dallas Contiguous Mode")
TDRV3=BINLPC2EMP.DLL ("LPC900 EPM Emulator/Programmer")
RTOS1=RTXTINY.DLL ("RTX-51 Tiny")
RTOS2=RTX51.DLL ("RTX-51 Full")
Version=V7.0
PATH="D:KeilC51"
SN=K1DZP-5IUSH-A01UE

[C251]
BOOK0=HLPRELEASE_NOTES.HTM("Release Notes")
BOOK1=HLPGS51.PDF("uVision2 Getting Started")
BOOK2=HLPC251.PDF("C251 Users Guide")
BOOK3=HLPC251LIB.CHM("C251 Library Functions",C)
BOOK4=HLPA51.PDF("Assembler/Utilities")
BOOK5=HLPDBG251.CHM("uVision2 Debug Commands")
TDRV0=BINMON251.DLL ("Keil Monitor-251 Driver")
Version=V3.5

[ARM]
PATH="D:KeilARM"
BOOK0=HLPRELEASE_NOTES.HTM("Release Notes")
BOOK1=HLPARMTOOLS.chm("Complete Users Guide Selection", C)
BOOK2=HLPRL_RELEASE_NOTES.HTM("RTL-ARM Release Notes")
BOOK3=HLPRVI.chm("RV Compiler Introduction")
BOOK4="C:Program FilesCodeSourcerySourcery G++ Litesharedocarm-2007q3-53-arm-none-eabipdfgccgcc.pdf" ("GNU C Compiler",GEN)
TDRV0=ULINKARM7.DLL("ULINK ARM7 Debugger")
Version=3.80a
PATH1="C:Program FilesCodeSourcerySourcery G++ Lite"
CPUDLL0=SARM.DLL(TDRV0,TDRV5,TDRV6,TDRV8) # Drivers for ARM7/9 devices
CPUDLL1=SARMCM3.DLL(TDRV1,TDRV3,TDRV4,TDRV5,TDRV7,TDRV8) # Drivers for Cortex-M devices
BOOK5="C:Program FilesCodeSourcerySourcery G++ Litesharedocarm-2007q3-53-arm-none-eabipdfas.pdf" ("GNU Assembler",GEN)
BOOK6="C:Program FilesCodeSourcerySourcery G++ Litesharedocarm-2007q3-53-arm-none-eabipdfld.pdf" ("GNU Linker",GEN)
BOOK7="C:Program FilesCodeSourcerySourcery G++ Litesharedocarm-2007q3-53-arm-none-eabipdfinutils.pdf" ("GNU Binary Utilities",GEN)
TDRV1=BINUL2ARM.DLL("ULINK ARM Debugger")
TDRV2=BINUL2CM3.DLL("ULINK Cortex Debugger")
TDRV3=BINAGDIRDI.DLL("RDI Interface Driver")
TDRV4=BINABLSTCM.dll("Altera Blaster Cortex Debugger")
TDRV5=BINlmidk-agdi.dll("Luminary Eval Board")
TDRV6=SignumSigUV3Arm.dll("Signum Systems JTAGjet")
TDRV7=SeggerJLTAgdi.dll("J-LINK / J-TRACE")
TDRV8=SeggerJL2CM3.dll("Cortex-M3 J-LINK")
TDRV9=STLinkST-LINKIII-KEIL.dll ("ST-Link Debugger")

[ARMADS]
PATH="D:KeilARM"
PATH1="BIN40"
BOOK0=HLPRELEASE_NOTES.HTM("Release Notes")
BOOK1=HLPARMTOOLS.chm("Complete Users Guide Selection", C)
BOOK2=HLPRL_RELEASE_NOTES.HTM("RTL-ARM Release Notes")
BOOK3=HLPRVI.chm("RV Compiler Introduction")
BOOK4=
BOOK5=
TDRV0=ULINKARM7.DLL("ULINK ARM7 Debugger")
Version=V0.1