Embest Samsung S3C6410X 32位單板計算機開發(fā)方案

? Memory Subsystem

? SRAM/ROM/NOR Flash Interface with x8 or x16 data bus.

? Muxed OneNAND Interface with x16 data bus.

? NAND Flash Interface with x8 data bus.

? SDRAM Interface with x32(Port1) data bus.

? Mobile SDRAM Interface with x32(Port1) data bus

? DDR Interface with x32(Port1 ) data bus

? Mobile DDR Interface with x32(Port1 ) data bus

The ARM1176JZF-S processor incorporates an integer unit that implements the ARM11 ARM architecture v6. It supports the ARM, Thumb? instruction sets and Jazelle technology to enable direct execution of Java bytecodes, and a range of SIMD DSP instructions that operate on 16-bit or 8-bit data values in 32-bit registers.

ARM1176JZF-S 處理器特性:

? High-speed Advanced Microprocessor Bus Architecture (AMBA) Advanced Extensible Interface (AXI) level two interfaces supporting prioritized multiprocessor implementations.

? Integer unit with integral EmbeddedICE-RT logic.

? Eight-stage pipeline.

? Branch prediction with return stack.

? Low interrupt latency configuration.

? coprocessors CP14 and CP15.

? Instruction and Data Memory Management Units (MMUs), managed using MicroTLB structures backed by a unified Main TLB.

? Instruction and data caches, including a non-blocking data cache with Hit-Under-Miss (HUM).

? Virtually indexed and physically addressed caches.

? 64-bit interface to both caches.

? Vector Floating-Point (VFP) coprocessor support.

Samsung S3C6410 ARM11 評估板

The Samsung S3C6410 Board based on the powerful Samsung S3C6410 ARM11 processor is a compact full-featured single board computer, it runs at up to 667MHz, integrates 128MB Mobile DDR SDRAM, 256MB NAND Flash and 2MB NOR Flash, as well as a wide range of peripherals like USB interface, Ethernet interface, four serial ports, TV OUT, camera interface. These comprehensive features make this device particular suitable for automotive, industrial control applications and medical systems. In addition, this board supports Windows Embedded CE 6.0, Linux2.6, Android and Ubuntu operating systems.

TFT LCD / Touch Screen interface, supporting 3.5, 4.3, 7 TFT LCD Panel

Temperature range of minus 20 degrees Celsius to 70 degrees Celsius, without fans or heat sinks

Windows Embedded CE 6.0 and Linux2.6, Android and Ubuntu supported.

The S3C6410 Board is a compact full-featured Embedded Single Board Computer (SBC) based upon Samsung ARM11 S3C6410, designed specifically for Mobile Internet Device, Notebook, handheld/3G mobile implementations. Its functional contents are similar to the latest generation of Pocket PC’s and smart phones. This computer allows easy embedded application development through PC-Compatible tools and methods, while ensuring in-field reliability and ruggedness for end-user systems. S3C6410 runs without fans or heat sinks in the temperature range of -20°C to +70°C. Other chip-level features include 4 UARTs, SPI, I2C, a real-time clock with a separate power domain, and NAND Flash and DDR memory controllers. These features make the devices particularly suitable for automotive and industrial control applications as well as medical systems. In addition, the board supports Windows Embedded CE 6.0, Linux2.6, Android and Ubuntu OS.

S3C6410評估板亮點:

. Rugged Single Board Computer(120mmx58mm) achieved through modern SMD technology

. Improved interference safety achieved through multi-layer PCB technology and dedicated ground pins

. Controller signals and ports extend to connectors aligning two sides of the board

. Four Ready-to-Run software package: WinCE6.0, Linux2.6.24, Android and Ubuntu

. Working temperature: -20℃ to 70℃

. Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.

. Power supply: +12V

. 128MB Mobile DDR SDRAM, 133MHz, 32bit, Samsung K4X51163PC

. 256MB NAND Flash, 8bit, Samsung K2F2G08

. 2M Bytes NOR Flash, AMD AM29LV160DB

. SDIO WIFI Module, supporting IEEE802.11b/g

. LCD/Touch Screen interface. Supporting 3.5 inch TFT LCD, 4.3 inch TFT LCD and 7 inch TFT LCD.

. Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 Matrix Keyboard.

. 24 GPIO, ADC, SPI,IIC and MMC connectors

. One audio input interface (3.5mm audio jack)

. One 2-channel audio output interface (3.5mm audio jack)

. One 100M Ethernet interface (RJ45)

. One USB2.0 Device port (Mini USB type interface)

. Four serial ports (Two are five-wire RS-232 DB9 interface, another two are three-wire TTL serial port led out from a 20-pin expansion connector )

. SD/MMC interface (supports 3.3V and 1.8V logic voltage)

. Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)

. One 5x2 pins JTAG interface