單片機C語言程序設計：8 只數碼管滾動顯示數字、字符

/* 名稱：8 只數碼管滾動顯示單個數字

說明：數碼管從左到右依次滾動顯示

0~7，程序通過每次僅循環選通一只數碼

管

*/

#includereg51.h>

#includeintrins.h>

#define uchar unsigned char

#define uint unsigned int

uchar code DSY_CODE[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};

//延時

void DelayMS(uint x)

{

uchar t;

while(x--) for(t=0;t120;t++);

}

//主程序

void main()

{

}

uchar i,wei=0x80;

while(1)

{

for(i=0;i8;i++)

{

P2=0xff; //關閉顯示

wei=_crol_(wei,1);

P0=DSY_CODE[i];發送數字段碼

P2=wei; //發送位碼

DelayMS(300);

}

}

/* 名稱：8 只數碼管動態顯示多個不同字符

說明：數碼管動態掃描顯示 0~7。

*/

#includereg51.h>

#includeintrins.h>

#define uchar unsigned char

#define uint unsigned int

uchar code DSY_CODE[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};